Water Heater Repair & Installation in Southern NH
Tank, tankless, heat pump: installed same-week in most cases.

- Service area
- Southern NH · 17 towns
- Office hours
- Mon–Fri 7am–5pm
- Licensing
- NH Licensed & Insured
- Estimates
- Free on installs
When your water heater goes, life stops. Service One installs traditional tank, high-efficiency tankless, and heat-pump water heaters (rebate-eligible in NH). We can usually replace a failed tank within 24–48 hours.
What's included
- Traditional tank (gas, electric, oil)
- Tankless on-demand systems
- Heat-pump water heaters (NHSaves rebate)
- 24–48 hour replacement on failed tanks
- Code-compliant venting and permits included
Related HVAC guides
Practical reading before you repair or replace equipment.
New Hampshire has no state HVAC contractor license, which makes it hard to tell a properly credentialed shop from a truck wrap. Here's exactly what to ask for and how to check it.
The 30%-of-replacement-cost rule is a good starting point, but only if you apply it honestly. Here's how to weigh age, repair history, heat exchanger safety, and current fuel costs before deciding.
Southern NH homes are chronically oversized on rule-of-thumb HVAC sizing. Here's what a proper Manual J load calculation measures, what goes wrong without one, and how to tell you got a real one.
Water Heater Install available across southern NH
Same service, same crew, in every town we cover.
What our customers say
Verified Google reviews from customers across southern New Hampshire.
"Service One did a great job getting my unit up and running. Quick response. Replaced both the furnace and condenser. Highly recommend them."
"Dana called me this morning and was able to squeeze me in to have Brian look at my central air motor. Brian was on time and was very professional and knowledgeable. Cannot thank Service One enough for saving me from today's 100° day. I will recommend Service One to all my friends."
"Very professional."
Typical water heater prices in southern New Hampshire
These are typical ranges for southern New Hampshire, not a quote. Your price depends on your home, your equipment and the scope of the work. Every installation estimate is free and itemized, and we give you an upfront price before any work starts.
| Job | Typical range |
|---|---|
Standard 40–50 gallon tank, installed | $1,600–$2,600 |
Tankless water heater, installed | $3,500–$5,500 |
Heat-pump water heater, installed Before NHSaves rebates. | $3,000–$4,800 |
Permits, venting and code-compliant disposal | Included |
What changes the price
- System size and the load your home actually needs
- Efficiency tier of the equipment you choose
- Condition of existing ductwork
- Venting and combustion air requirements
- Permits and local inspection
- Access: attic, crawlspace, tight basement or upper-floor work
Frequently asked
Rust-colored water, a tank that's leaking or sweating at the seams, a pilot or element that keeps failing, or a unit past its 8–12 year expected life are all signs replacement is more sensible than another repair. A working thermocouple or element issue on a younger tank is usually a straightforward repair instead.
A tank heater stores and continuously reheats a set volume of hot water, while a tankless unit heats water on demand as it flows through, with no standby storage loss. Tankless units take up less space and can supply hot water indefinitely, but require adequate gas or electrical capacity and proper venting.
Heat-pump water heaters work well in a conditioned basement or utility space with enough air volume around the unit, since they pull heat from the surrounding air. They're NHSaves rebate-eligible and use significantly less electricity than a standard electric tank, but they're not ideal in a small, cold, unconditioned closet.
Sizing depends on household size, number of bathrooms, and peak usage habits like back-to-back showers or a large soaking tub. We size tank capacity or tankless flow rate (GPM) to your actual usage during the in-home evaluation rather than defaulting to a one-size-fits-all replacement.
Yes, water heater replacements in New Hampshire typically require a plumbing and/or gas permit and inspection, especially when venting or gas line work is involved. We pull the required permits as part of the installation.
In most cases, yes, provided the home has an adequate gas line or electrical capacity available. Switching fuel types is evaluated during the estimate since it can involve new venting, gas piping, or electrical work beyond a straight swap.
Typical market ranges in southern New Hampshire: $1,600–$2,600 installed for a standard 40–50 gallon tank, $3,500–$5,500 for tankless, and $3,000–$4,800 for a heat-pump water heater before NHSaves rebates. Your price depends on your home and equipment: every installation estimate is free and itemized. Permits, venting, and code-compliant disposal are included.
Tank is cheaper up front and simple to service. Tankless costs more but uses 25–35% less energy, lasts about twice as long, and never runs out of hot water. For families of 4+ in southern NH, tankless usually pays back within 8–12 years.
Yes, most southern NH basements stay above 50°F year-round, which is the operating range heat-pump water heaters need. They cost more up front but cut water-heating energy by 60–70% and qualify for NHSaves rebates.
Most Service One water heater swaps are done within 24–48 hours in southern NH. Emergency same-day installs are available for total failures: call the office and we'll dispatch the same day.
Standard tank water heaters last 8–12 years in NH. Tankless units 18–22 years. Heat-pump water heaters 12–15 years. Annual flushing on tank models adds 2–4 years.
Yes. Service One is fully NH-licensed and insured. All work is code-compliant and permitted where required.
Related services
Need Water Heater Install today?
Same-day service across most of southern NH. Free estimates on installations.
