Commercial HVAC Across Southern New Hampshire
Rooftop units, chillers, cooling towers, and commercial boilers for restaurants, offices, retail, medical, light industrial, and multi-tenant properties, plus preventive maintenance contracts that keep your business open.

Segments we work with
Commercial HVAC problems vary a lot by business type. What breaks a restaurant's system isn't what breaks a medical office's, so the fix has to be specific to how the space is actually used. For the specifics of what happens on a typical commercial service call and how we put together an estimate, see our commercial HVAC service page.
Restaurants
What goes wrong: Kitchen exhaust and makeup air fall out of balance as equipment changes, hood filters clog, or a building gets tighter over time, leading to a smoky kitchen, a struggling HVAC system fighting negative pressure, or a failed health inspection.
What we do: We balance makeup air against kitchen exhaust, service hood fans and fire suppression tie-ins, and make sure the dining room HVAC isn't fighting the kitchen's pressure differential.
Offices
What goes wrong: Open floor plans, conference rooms, and server or IT closets all have different loads, and a single zone rarely serves all of them well.
What we do: RTU service, VAV and zone damper work, and supplemental cooling for server rooms so the space stays comfortable without one thermostat trying to satisfy every room.
Retail
What goes wrong: Storefronts see heavy door traffic, high occupancy swings, and often run older packaged units original to the building.
What we do: RTU repair and replacement sized for real occupancy patterns, plus PM contracts that catch failing components before a hot or cold storefront drives customers out.
Medical & dental
What goes wrong: Medical and dental spaces have humidity and filtration requirements tied to infection control and equipment sensitivity that a standard commercial system isn't built for.
What we do: Filtration upgrades, humidity control, and airflow balancing that meet the practice's operational requirements, coordinated with your equipment vendors and any applicable code requirements.
Light industrial
What goes wrong: Shop floors, warehouses, and light manufacturing spaces deal with process heat loads, dust, and large volumes that residential-scale thinking doesn't solve.
What we do: Unit heaters, RTU and make-up air sizing for the actual space and process load, and ventilation that accounts for dust or fume generation.
Multi-tenant properties
What goes wrong: Multiple tenants on shared or separately metered systems create disputes over who pays for what, and a single failed unit can affect several suites.
What we do: Per-suite zoning and metering-aware system design, plus PM contracts structured so property managers can track equipment condition across the whole building, not just react suite by suite.
Equipment and work we handle
- Rooftop units (RTUs): repair, replacement, and full swaps
- Commercial chillers and cooling towers
- Commercial boilers: steam and hot water
- Design-build mechanical systems for tenant fit-outs
- Preventive maintenance contracts (quarterly, bi-annual, or custom)
- New commercial construction mechanical systems
What a preventive maintenance agreement actually covers
A commercial PM agreement isn't a discount program: it's a way to manage the real cost of unplanned downtime. A failed RTU on a July afternoon or a boiler that goes down on a January morning doesn't just cost a repair bill; it costs lost business, uncomfortable customers or employees, and in some cases spoiled inventory. Regular inspections catch the failures that lead to those outcomes before they happen.
A typical PM visit includes checking refrigerant charge and pressures, inspecting electrical connections and contactors, testing safety controls, cleaning coils and condensate drains, checking belts and bearings, and reviewing combustion on gas- or oil-fired equipment. We also track equipment condition over time so you have real data, not guesswork, when it's time to plan a capital replacement.
Customers under an active PM contract get priority in our scheduling when equipment fails between visits. We don't promise a specific arrival window, but contracted customers move to the front of the queue ahead of non-contract calls.
Design-build and new construction
For tenant fit-outs and ground-up commercial construction, we design mechanical systems around the actual use of the space: not a generic template. That means sizing RTUs and boilers to real occupancy and process loads, laying out ductwork and zoning for how the tenant will actually operate, and coordinating scheduling with general contractors, electricians, and plumbers so mechanical work lands where it needs to in the build sequence.
See our new construction & design-build processTalk to us about your building
Full residential and commercial service details, plus every service we offer, are listed on our services page.
View our Commercial HVAC service pageRequest a commercial quote
Tell us about your building and we'll follow up to schedule a walkthrough.
Serving businesses across all 17 towns in our service area in Hillsborough and Rockingham counties.
Frequently asked
Yes. Most planned commercial work, PM visits, filter changes, RTU swaps, tenant fit-out mechanical work, is scheduled around your operating hours so it doesn't interrupt customers or staff. We work with property managers and business owners directly to plan timing, whether that means early mornings, a slow weekday, or a scheduled closure. Our office hours are Monday–Friday 7am–5pm; emergency service is available outside those hours, but planned commercial work outside that window needs to be scheduled in advance.
Rooftop units, chillers, and commercial boilers all have a realistic service life, and replacement cost is far easier to plan for than to absorb as an emergency. During PM visits we track the condition of your equipment, refrigerant circuit health, heat exchanger condition, compressor amp draw, and flag units that are approaching end of life so you can budget a replacement over a year or two instead of scrambling when a unit fails during a heat wave or cold snap.
Most commercial RTUs run 15–20 years with regular maintenance, though usage, exposure, and climate loading in southern NH weather all affect that range. A unit that's been skipped on maintenance or that runs continuously in a restaurant or retail space with heavy occupancy load will wear faster. PM contracts extend service life by catching refrigerant, electrical, and airflow problems before they turn into compressor failures.
The HVAC industry is shifting to lower-GWP refrigerants (such as R-454B) in new equipment as R-410A is phased down under federal regulation. This mainly affects new equipment purchases and major replacements: existing R-410A systems can continue to be serviced. When we quote a new RTU, chiller, or split system, we'll tell you which refrigerant it uses and what that means for future service and parts availability.
It depends on scope. A straightforward RTU tie-in with new ductwork and a few zone dampers for a small retail or office suite might take a few weeks from design to commissioning. A restaurant build-out with new makeup air, kitchen exhaust, and grease duct work, or a medical suite with dedicated filtration and humidity control, takes longer because of the additional code review and equipment lead times. We give a realistic timeline once we've seen the space and the landlord's base building requirements.
A one-off service call addresses a specific problem after it happens. A maintenance contract puts your equipment on a regular inspection schedule (typically quarterly or bi-annual) so small issues are caught early, and it puts you in the priority queue for response when something does break between visits. It's the difference between reacting to downtime and managing it.
Ready to talk about your building?
Free walkthrough and quote for new commercial work. Priority response for PM contract customers.
