How the NHSaves Heat Pump Rebate Process Works
A plain-English walkthrough of eligibility, pre-verification, contractor requirements, documentation, and timing. For the current dollar amounts, see our full rebate breakdown.
How to get the NHSaves heat pump rebate
The rebate process is short: most of it is handled by your contractor. Here are the steps Service One walks every NH customer through:
- 1
Check the NHSaves qualifying products list
The rebate is tied to a specific model number and its HSPF2/SEER2 ratings. Ask for the AHRI certificate for the exact indoor/outdoor combination being quoted, not just the brand.
- 2
Book a free in-home estimate
A load calculation and a written estimate listing model numbers and installed price are what the rebate application is built from. Service One provides both at no cost.
- 3
Confirm the installer is NHSaves-participating
NHSaves only pays rebates on installs performed by participating contractors. Service One is participating, so the install itself satisfies this requirement.
- 4
Let the installer file the application
Service One submits the NHSaves paperwork, invoice, AHRI certificate, and model details, the same week the system is commissioned. Nothing needs to be mailed by the homeowner.
- 5
Cash the rebate
NHSaves checks typically arrive several weeks after submission. Keep the final invoice for your records. The federal 25C tax credit terminated December 31, 2025, so there is no federal credit to claim on a 2026 installation.
Eligibility, in plain terms
- You must be a residential electric customer of a participating utility, Eversource, Liberty, or Unitil, or an NH Electric Co-op member under its own version of the program.
- The installed equipment must appear on the current NHSaves Heat Pump Qualified Product List by exact model number, not just brand.
- Installation must be performed by an NHSaves-participating contractor. Service One is participating.
- A ductless system only earns the higher ductless-replacing-electric-resistance rate when the home was previously heated with electric baseboard or an electric furnace: an oil, propane, or natural gas home does not qualify for that tier.
- The ductless-replacing-electric-resistance tier requires pre-verification before installation; standard ducted and central AC rebates don't.
Qualifying heat pump brands (NH)
Most current models from these manufacturers appear on the NHSaves list. Service One confirms the specific model on your estimate.
- Mitsubishi Hyper-Heat (H2i)
- Fujitsu XLTH cold-climate series
- Bosch IDS 2.0
- Carrier Infinity cold-climate
- LG LGRED° cold-climate
- Trane heat pumps (select models)
Documentation you'll need
The rebate application is built from paperwork your contractor should already be generating: a written, itemized estimate listing the exact model numbers for indoor and outdoor units, the AHRI certificate for that indoor/outdoor combination, and the final invoice showing installed price and completion date. If a contractor can't produce an AHRI certificate for your specific system before you sign, that's a red flag for rebate eligibility, not just paperwork.
See if a cold-climate heat pump fits your home
Learn how cold-climate heat pumps actually perform in NH winters: capacity below zero, hybrid setups, real install costs.
Read the cold-climate heat pump guideFrequently asked
It depends on what you're replacing: see our full 2026 rebate breakdown for the exact current figures. In short: ducted heat pumps earn a flat per-ton rate no matter what fuel they replace, while ductless mini-splits only earn the much larger per-ton rate when they replace electric resistance heat, like electric baseboard. Oil, propane, and natural gas homes get $0 on that higher ductless tier.
Only equipment on the current NHSaves Heat Pump Qualified Product List is eligible. Most current Mitsubishi Hyper-Heat, Fujitsu XLTH, Bosch IDS, and Carrier Infinity systems qualify, but eligibility is tracked by specific model number, not brand. Service One confirms the exact model against the list on every heat pump estimate.
Yes. NHSaves rebates are only paid when the installation is performed by a participating contractor. Service One Heating and Cooling is an NHSaves-participating contractor and files the paperwork on your behalf as part of every install.
Pre-verification is required specifically for the ductless-replacing-electric-resistance rebate tier. Standard ducted rebates and central AC rebates don't require it, but every project should be confirmed against the current qualified product list before you sign a contract.
Rebate checks from NHSaves typically arrive several weeks after the paperwork is submitted. Service One submits the same week as install, so most southern NH customers see their check well ahead of the program's postmark deadline.
No. The federal Section 25C energy efficient home improvement credit terminated on December 31, 2025, so there is no federal heat pump tax credit for 2026 installations. The NHSaves rebate and the New England Heat Pump Accelerator instant discount do still stack with each other.
Yes, but on a different schedule than ducted systems. Ductless mini-splits earn NHSaves' standard ducted-equivalent rate in most cases, and only qualify for the higher per-ton ductless rate when they're replacing electric resistance heat, with pre-verification completed first. See our rebates page for the exact current dollar amounts for your situation.
Ready to claim your NHSaves rebate?
Free estimate. Rebate paperwork included. Call or book online.
