Ductwork Design, Repair & Sealing in Southern NH
Leaky ducts waste up to 30% of heated and cooled air. We fix that.

- Service area
- Southern NH · 17 towns
- Office hours
- Mon–Fri 7am–5pm
- Licensing
- NH Licensed & Insured
- Estimates
- Free on installs
Duct problems cause hot and cold rooms, high energy bills, and short-cycling equipment. Service One designs new duct systems for additions and full renovations, seals leaky returns and supplies with mastic (not just tape), and re-balances existing systems for even room-to-room comfort.
What's included
- New duct design (Manual D) for additions & renovations
- Mastic-sealed leak repair
- Zoning systems for multi-story homes
- Return-air improvements for airflow-starved rooms
- Insulation upgrades for attic and crawlspace ducts
Related HVAC guides
Practical reading before you repair or replace equipment.
Southern NH homes are chronically oversized on rule-of-thumb HVAC sizing. Here's what a proper Manual J load calculation measures, what goes wrong without one, and how to tell you got a real one.
Southern NH's winter design temperature is 0°F, not the polar-vortex night people remember. Here's how cold-climate heat pumps actually hold up, and the real reasons some installs disappoint.
Learn how auxiliary heat, thermostat settings, airflow, weather, utility rates, and system sizing can affect electricity use after a heat pump installation.
Duct Design & Repair available across southern NH
Same service, same crew, in every town we cover.
What our customers say
Verified Google reviews from customers across southern New Hampshire.
"Service One did a great job getting my unit up and running. Quick response. Replaced both the furnace and condenser. Highly recommend them."
"Dana called me this morning and was able to squeeze me in to have Brian look at my central air motor. Brian was on time and was very professional and knowledgeable. Cannot thank Service One enough for saving me from today's 100° day. I will recommend Service One to all my friends."
"Very professional."
Typical ductwork prices in southern New Hampshire
These are typical ranges for southern New Hampshire, not a quote. Your price depends on your home, your equipment and the scope of the work. Every installation estimate is free and itemized, and we give you an upfront price before any work starts.
| Job | Typical range |
|---|---|
Mastic-based duct sealing Varies with system size and access. | $600–$1,800 |
What changes the price
- System size and the load your home actually needs
- Efficiency tier of the equipment you choose
- Condition of existing ductwork
- Venting and combustion air requirements
- Permits and local inspection
- Access: attic, crawlspace, tight basement or upper-floor work
Frequently asked
Rooms that are consistently hotter or colder than the rest of the house, weak airflow at certain registers, and a furnace or AC that runs long cycles without catching up all point to duct issues rather than the equipment itself. A static pressure reading at the air handler usually confirms it.
Most duct sealing happens at accessible joints in the attic, basement, or crawlspace where ducts run exposed. Sealing those connections with mastic addresses the majority of leakage in a typical southern NH home without opening finished spaces.
Uneven floor-to-floor temperatures are usually a duct design and balancing issue: undersized returns upstairs, an unbalanced trunk line, or ducts that were never sized for the current layout. A zoning system or duct rebalance is often the fix.
Many homes built before the 1990s have ductwork that was sized for older, less efficient equipment or added on piecemeal as additions went up. That mismatch between duct capacity and current equipment is a common source of comfort complaints we see in this area.
Ducts running through an unconditioned attic or crawlspace lose or gain heat to the surrounding space before that air ever reaches a room. Insulating exposed runs reduces that loss and is inexpensive relative to the comfort it buys back.
Sealing accessible leaks in a typical home is usually a single visit. Larger redesigns, new trunk lines, added returns, or zoning, take longer and are scoped during an in-home evaluation once we've seen the existing layout.
Hot and cold rooms, dust in the air even with good filters, high energy bills, whistling from vents, or visible disconnected joints in the basement or attic. Leaky ducts can waste 20–30% of your heated and cooled air.
Typical market range in southern New Hampshire is $600–$1,800 for mastic-based duct sealing, depending on system size and access. Your price depends on your home and equipment: every installation estimate is free and itemized.
Yes, full Manual D duct design for additions, full renovations, and new-construction. Proper sizing prevents the noisy, drafty, uneven results that come from guesswork.
Any ductwork in an attic, crawlspace, or unconditioned basement should be sealed and insulated to R-6 or R-8. Uninsulated ducts in these spaces can lose 15–25% of the heat or cool they carry.
Yes. Service One is fully NH-licensed and insured. All work is code-compliant and permitted where required.
Related services
Need Duct Design & Repair today?
Same-day service across most of southern NH. Free estimates on installations.
